Open as PDF
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Search for a station
Press B SRC to select TUNER.
2 Press JBAND repeatedly (or press
RC-406) to select FM1/ FM2/ FM3/ AM.
3 Press S / T (or press S / T(+) on RC-406) to
search for a station.
• To change the searching method for S / T: Press
AUTO1: Automatically search for a station.
AUTO2: Search for a preset station.
MANUAL: Manually search for a station.
• To store a station: Press and hold one of the number
• To select a stored station: Press one of the number
buttons (1to6) (or press one of the number buttons
(1to6) on RC-406).
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press ENTIW to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10seconds after step
Access Tuning is automatically canceled.
Press the volume knob to enter
2 Turn the volume knob to make a selection (see the following table), then press
3 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
:Automatically starts memorizing 6 stations with good reception.;
(Selectable only if
is selected for
:Improves the FM reception, but the stereo effect may be lost.;
:Allows the unit to temporarily switch to Traffic Information.;
Selects the available Program Type (see below), then, press
S / T
:Synchronizes the unit’s time to the Radio Broadcast Data System station time.;
is selectable only when the band is FM1/ FM2/ FM3.
• Available Program Type:
R & B
(rhythm and blues),
(soft rhythm and blues),
The unit will search for the Program Type categorized under
• If the volume is adjusted during reception of traffic information or alarm, the adjusted
volume is memorized automatically. It will be applied the next time traffic information
or alarm function is turned on.
EN_KDC_X598_KWK0_f.indd 5EN_KDC_X598_KWK0_f.indd 5 8/11/2013 5:11:37 PM8/11/2013 5:11:37 PM