Filter
Top Products
4-5. CLOCK AND TIMER
TIMER switch
This switch controls the time operation. When the TIMER
switch is ON, the timer has priority over the POWER
switch. If the radio will not turn on, check this switch!
®
CLOCK1 /OFF/CLOCK2 switch
CLOCK 1 : Use this position, to display local time. Timer
operation is controlled by local time.
OFF
: In this position, nothing is displayed.
CLOCK 2 : In this position, a second time zone may be en-
tered for display. Timer-ON/OFF operation is
not controlled by clock 2 time. Set this clock
to GMT or any other time zone that you wish
to monitor.
®
TIME SET switch
This switch is used to set the timer and the clock time.
®
OFF TIME switch
Use this switch to display the time that the radio has been
programmed to turn OFF.
®
ON TIME switch
Use this switch to display the time that the radio has been
programmed to turn ON.
®
HOUR key
Sets the hours.
© MINUTE key
Sets the minutes. Pressing this switch simultaneously
with the HOUR switch resets the clock or timer.
4-5-2. Clock
The R-5000 has two independent 24-hour clocks, CLOCK
1 and CLOCK 2. The clock times may be viewed with the
POWER switch ON or OFF. Both methods are described
below.
A. Clock selection
CLOCK 1 or CLOCK 2 is selected by the slide switch on
the front panel.
a. When the POWER switch is ON.
25