Filter
Top Products
21
Introduction
General operation
The system automatically stores the
volume settings on switching off.
After switching on again, the volume
may be quieter than when switched off.
It is quieter if:
ț the system was switched off for more
than 15 minutes
ț or if the volume was set to a value out-
side a certain range when switching off
Automatic volume control
The automatic volume control adjusts the
volume depending on
ț the vehicle speed (only in vehicles with-
out Sound-system*)
ț or noises inside the vehicle (only in ve-
hicles with Sound-system*)
Balance and Fader
A single setting is stored for the balance
and the fader for radio, cassette and CD
mode. The system automatically stores
each setting.
The balance and the fader setting for tele-
phone mode are independent of all other
operating modes. The system automatical-
ly stores each setting.
Adjusting balance and fader:
̈ Press b.
The Balance/Fader menu is displayed.
The vertical bar indicates the balance
setting.
The horizontal bar indicates the fader
setting.
̈ Press or r.
This will change the balance setting.
or
̈ Press c or d.
This will change the fader setting.
̈ Press the Reset soft key if desired.
This will reset the balance and the fad-
er to the center setting.
̈ Press p or the Return soft key.
or
̈ Wait until the Volume menu disap-
pears.
The new setting is stored.