Filter
Top Products
30
Audio
Radio mode
̈ By pressing c, d, or r select
a preset.
̈ Press p.
The system tunes to the preset station.
After a short time, the main menu of
the respective waveband is displayed.
Selecting using the scan search
The scan search is available in the FM and
AM waveband.
The scan search plays each receivable sta-
tion for approx. 8 seconds.
During the first search, stations with ex-
tremely good reception are played. During
the second search, stations with weaker
reception are also played.
The scan search automatically stops at the
station listened to before the scan search
was started.
̈ Switch on the desired waveband
(
୴ Page 27).
̈ Press the Scan soft key.
The scan starts.
̈ Press the Scan soft key again.
The scan stops.
Selecting using manual tuning
Manual tuning is available in the FM and
AM wavebands.
̈ Switch on the desired waveband
(
୴ Page 27).
̈ Press X for forward or Y for
backward. Press and hold the button
for at least 2 seconds.
Manual tuning is activated.
̈ Keep holding the button, or release it
and keep tapping it in quick succes-
sion.
Every press of the button causes the
frequency to change incrementally un-
til the button is released.
Manual tuning is deactivated if the but-
ton is not pressed for approx. 3 sec-
onds.