Filter
Top Products
31
Audio
Radio mode
Selecting using manual frequency entry
Manual frequency entry is available in the
FM and AM wavebands.
Entry example: 97.9 MHz in the FM wave-
band:
̈ Switch on the FM waveband
(
୴ Page 27).
̈ Press Q.
The frequency entry screen is dis-
played. This gives the frequency range
of the FM waveband.
̈ In sequence press the number
buttons
9, 7 and 9.
Each number entered is displayed on
the screen.
̈ Press p.
The system tunes to the frequency. Af-
ter a short time, the FM main menu is
displayed.
Storing stations
The FM and the AM waveband each have
ten available presets.
You have the following options:
ț Manual storing (୴ Page 31)
ț Storing using Autostore (୴ Page 32)
Manual storing
Manuel storing using number buttons:
̈ Tune to the station to be stored
(
୴ Page 27).
̈ Press one of the buttons ! - 0 for
more than 2 seconds.
A signal tone can be heard and the sta-
tion is stored at the corresponding pre-
set.
i
Frequency increments for manual tun-
ing:
FM: 200 kHz
AM: 10 kHz
i
It is not possible to make entries out-
side the frequency range.
୴୴