Filter
Top Products
English-21
English
BNC cable
RCA cable (audio)
S-VIDEO IN AUDIO IN2
AUDIO OUT VIDEO IN
VIDEO OUT
VIDEO IN
To S video output
To video output
To Audio output
To Audio input
RCA cable (audio)
S video cable
BNC cable
R
B
G
HV
DVI IN
D-SUB IN
D-SUB OUT
HDMI
RS-232C IN
RS-232C OUT
VIDEO IN
VIDEO OUT
S-VIDEO
IN1
IN2
IN3
OUT
R
L
Connecting a video device (composite video/S video device)/stereo amplifi er
This monitor can be connected to a stereo amplifi er.
Refer to the user’s manual of the stereo amplifi er for details. (Cables shown in the fi gure below are commercially available.)
• To connect a video device to the VIDEO IN connector (VIDEO IN or S-VIDEO IN) on the monitor, use a BNC cable or an S video
cable. For connection to the audio input connector on the monitor, use an RCA cable (audio cable). Connect the connectors
of the RCA cable (audio) correctly. For connection to the VIDEO IN connector, select [VIDEO] using the INPUT button on the
monitor or the VIDEO button on the wireless remote control. For connection to the S-VIDEO IN connector, select [VIDEO<S>]
using the INPUT button on the monitor or the VIDEO(S) button on the wireless remote control.
• When connecting a stereo amplifi er to the monitor, be sure to turn off the power of the stereo amplifi er. For connection to the
audio output connector on the monitor, use an RCA cable (audio). Connect the connectors of the RCA cable (audio) correctly. Be
sure to turn on the monitor fi rst, and then turn on the stereo amplifi er.
• The selected audio input signal is output from the AUDIO OUT connector.
LCD monitor (fi rst monitor)
LCD monitor (second monitor)
LCD monitor (rear)
Stereo amplifi er
External speaker External speaker
Video device
(composite video/S video device)
P-4 Connection procedure (continued)
Downloaded From TV-Manual.com Manuals