Filter
Top Products
English-41
English
OSD screen functions (continued)
ADVANCED OPTION
INPUT CHANGE
You can select the time for input switching from QUICK and
NORMAL.
NOTE : When you select QUICK, slight noise may appear.
TERMINAL SETTING
You can select the mode to display the RGB1 (HDMI)
or RGB2 (DVI-D) signal according to their signal format
depending on their source device.
DVI-MODE:
Select this setting when displaying the RGB2 (DVI-D) signal.
Select DVI-PC when the source device is a PC.
Select DVI-HD when the source device is a video
device.
HDMI SIGNAL:
Select this setting when displaying the RGB1 (HDMI) signal.
Select LIMITED when displaying the signal that uses 16
to 235 levels of 256 levels for each of R, G, and B.
Select FULL when displaying the signal that uses all 256
levels (from level 0 to 255).
SCAN CONVERSION
* For the RGB1 (HDMI), DVD/HD, VIDEO<S>, and VIDEO
inputs only.
You can select the IP conversion mode.
PROGRESSIVE: Interlace signals are converted into
progressive signals. Select this setting for
normal cases.
INTERLACE: Interlace signals are displayed without
being converted. Though this setting is
suitable for motion images, still images
aren’t displayed properly.
COLOR SYSTEM
* For the VIDEO<S> and VIDEO inputs only.
You can select the color system depending on the video
device you use.
AUTO: NTSC, PAL, SECAM, PAL60 or 4.43 NTSC is
automatically selected.
NTSC: NTSC
PAL: PAL
SECAM: SECAM
4.43NTSC: 4.43 NTSC
PAL-60: PAL60
NOTE : When you use a video device purchased from
overseas, set the COLOR SYSTEM menu.
SCAN MODE
* For the RGB1 (HDMI), DVD/HD, VIDEO<S>, and VIDEO
inputs only.
You can select the image display area.
OVERSCAN: About 95% of the input image is displayed.
UNDERSCAN: Almost 100% of the input image is
displayed.
ADVANCED OPTION RESET
You can reset all the ADVANCED OPTION settings to the
factory defaults.
FACTORY RESET
You can reset all the settings of PICTURE, SCREEN,
AUDIO, CONFIGURATION1, CONFIGURATION2,
CONFIGURATION3, and ADVANCED OPTION to the factory
defaults.
Note that you cannot reset the settings of LANGUAGE and
DATE AND TIME.
Downloaded From TV-Manual.com Manuals