Filter
Top Products
29
Chapter6Reference
6-2. Connecting Multiple PCs
The product has multiple connections to PCs and allows you to switch to one of the connections for display.
Attention
• Do not use dual link cables.
• It is assumed the touch panel monitor will be used with one computer. When the monitor is to be connected to multiple
computers, connect a USB cable (MD-C93) to the computer used for touch operation (one unit only).
Connection examples
D-Submini15-pin
connector
Signalcable
(suppliedFD-C39)
Signalcable
(suppliedMD-C87)
D-Subconnector
ToPC1
DVI-Dconnector
ToPC2
Digital
(DVI)
Analog
DVI
connector
●
To switch among input signals
The input signal switches each time is pressed.
When the signal is switched, the active input port name appears at the top right corner of the screen.
When the signal is switched, the active signal type (Analog or Digital) appears at the top right corner of the
screen for three seconds.