Filter
Top Products
18
Tag 3 AUTO ADJUST
LEVEL
(Analog input only)
Determines which items are to be adjusted when the AUTO
ADJUST function is activated.
The choices are “SIMPLE” “FULL”, and “DETAIL”.
Press ”Left” or “Right” to select.
Size, Fine,
Position
Contrast Black Level, Long
Cable capability**
Time
SIMPLE O X X 1 Sec.
FULL O O X 1.5 Sec.
DETAIL*
O O O 5 Sec.
O: Automatic Adjustment X: No Automatic Adjustment
* “DETAIL” activates automatic long cable (skew, peaking) adjustment.
** Black level, RGB sharpness, RGB delay and RGB position can be adjusted using the
Long Cable Software. To download the software, please visit www.necdisplay.com.
A-NTAA SW
(Analog input only)
The Advanced No Touch Auto Adjust function is able to recog
-
nize new signals even when neither the resolution nor the refresh
rate has changed. If several PCs are connected to the monitor,
and each transmit very similar (or even the same) signals in terms
of resolution and refresh rates, the monitor recognizes that there
is a new signal and automatically optimizes the picture without
the need for any action on the part of the user.
OFF: A-NTAA is disabled.
ON: If a change in signal is detected A-NTAA will adjust the
monitor to the optimal settings for the new signal. If no change in
the signal is detected then A-NTAA does not activate. The screen
will be blank while the monitor optimizes the signal.
OPTION: Functions the same as ON, except that the screen does
not go blank when the monitor makes adjustments for changes
in signal, allowing the monitor to display the new signal faster.
When using an external switching device to connect 2 or more
PCs to the monitor,using either the ON or OPTION setting is
suitable.
Advanced OSM Controls – continued