Filter
Top Products
41
Maintenance
Reset the device
You can press “MENU” to open the setup menu. To Reset the device, navigate to Setup menu and
select “Restore Default” and press “ENTER”. Please refer to setup section for the details.
Power on/Standby time
The device needs sometime to power on. The time costs are listed below.
Plug in the power -> power on and ready to use: it takes about 15 seconds.
Power on status -> Standby mode by pressing the power button: it takes about 15 seconds.
Standby mode -> power on mode by pressing the power button: it takes about 8 seconds.
In this short time, the remote control unit and the power button are not functional.
Battery
When the distance of remote control is dropped dramatically, please replace the new battery for
the remote control.
Black screen
If you get black screen while starting to play Movie or Photo files, please check the connection
from TV to the device and the resolution. For YPbPr, the maximum resolution is 1080i. Press
“resolution” key to change the resolution until the screen displays. For HDMI connection, select “HDMI
Auto” to detect the resolution of TV set automatically. For CVBS, it always output SD 480i/576i so you
can change to CVBS to check the setting of player.