Filter
Top Products
Using the Timers
44
The CD receiver has four programmable timers for
automated playback, and a sleep timer for turning the
CD receiver off after a specified period.
The timers can be used to start all the playback at a
specified time. You could, for example, use a timer to
turn on the CD receiver every morning, just like a
radio alarm clock.
About the Timers
The various settings for the four programmable
timers are explained here. For details on the sleep
timer, see page 46.
Repeat Timers
Each timer can be programmed to work just once
(Once), every week (Every), every day (Everyday),
or on a range of days (Days Set).
Once
The timer will work just once.
Every
The timer will work every week on the specified
day and time.
• Everyday
The timer will work every day.
• Days Set
The timer will work on the specified range of
days. With this setting, you could set up a
morning alarm from Monday to Friday.
Timer Example
To wake up to your favorite radio station (preset #1)
every morning, you could program a timer as
follows:
FM
ݬ
#1
ݬ
Every
ݬ
Everyday
ݬ
On 7:00
ݬ
Off 7:30
ݬ
Timer Vol. 15
If you want a radio alarm only on weekdays, select
“Days Set” instead of “Every Day” and specify
“MON–FRI”.
Timer Priority
If two or more timers are set to the same On time, the
lowest numbered timer has priority. For example:
Timer 1:
07:00 – 13:00 (This timer has priority.)
Timer 2:
07:00 – 12:30
If two or more timers overlap, the timer with the
earliest start time has priority. For example:
Timer 1:
9:00 – 10:00
Timer 2:
8:00 – 10:00 (This timer has priority.)
If the On and Off times of two timers are the same,
the timer with the earliest start time has priority and
the other timer will fail. For example:
Timer 1:
0:00 – 1:00 (This timer has priority.)
Timer 2:
1:00 – 2:00
Time Indicators
When a timer has been set, the TIMER ( )
indicator and the number of the timer appear on the
display.
Notes:
• The timers work only if the CD receiver is on
Standby. If it’s on when a timer is supposed to
start playback, nothing will happen.
• While timed playback is in progress, the timer’s
Off time cannot be changed.
Programming the Timers
Notes:
• You must set the clock before you can program
the timers.
• Before programming a timer to turn on the radio,
you must preset the station you want to use. (See
pages 37 and 38.)
• If you don’t operate any buttons for 60 seconds
while programming a timer, the procedure will be
cancelled and the previous display will reappear.
1
Press the [TIMER] button repeatedly
to select timer 1, 2, 3, or 4, and then
press [ENTER].
If “Clock” appears, you need to set the
clock (see pages 17, 42, and 43).
2
Use the [ ] / [ ] buttons to
select the source, and then press
[ENTER].
You can select the following sources:
(CR-545)
CD, iPod, USB, FM, AM, or LINE
(CR-545UKD)
CD, iPod, USB, DAB, FM, or LINE
If you selected other than
“FM”,“AM”, or “DAB”, skip to step 4.