Filter
Top Products
Setting the Clock—Continued
45
3
(CR-545)
If you selected FM or AM, use the
[ ] / [ ] buttons to select the
radio preset, and then press
[ENTER].
(CR-545UKD)
If you selected DAB or FM, use the
[ ] / [ ] buttons to select the
radio preset, and then press
[ENTER].
4
Use the [ ] / [ ] buttons to
select Once or Every, and then press
[ENTER].
Select “Once” for one-off operation. Select
“Every” to perform the same operation
every week.
5
If you selected “Once”, use the
[ ] / [ ] buttons to select the
day, and then press [ENTER].
You can select: SUN, MON, TUE, WED,
THU, FRI, or SAT.
Skip to step 8.
6
If you selected “Every”, use the
[ ] / [ ] buttons to select the
day, “Everyday”, or “Days Set”, and
then press [ENTER]. If you selected
other than “Days Set”, skip to step 8.
You can select the followings:
7
If you selected “Days Set”, use the
[ ] / [ ] buttons to select the
first day, and then press [ENTER].
Use the [ ] / [ ] buttons again
to select the last day, and then press
[ENTER].
You can select only consecutive days.
8
Use the [ ] / [ ] buttons to
specify the On time, and then press
[ENTER].
You can also use the remote controller’s
number buttons to enter the time. For
example, to enter 7:29, press [7], [2], and
[9].
Note:
Once the On time is set, the Off time is
automatically set to one hour later.
9
Use the [ ] / [ ] buttons to
specify the Off time, and then press
[ENTER].
10
Use the [ ] / [ ] buttons to
specify the CD receiver’s volume
level, for the timer setting, and then
press [ENTER].
To keep the latest volume level for the
timer setting, press [ ] button
repeatedly until “TimerVol.Lst” appears on
the display and set.
11
Timer indicator 1, 2, 3, or 4 will light
up.
Press the [ON/STANDBY] button to
set the CD receiver to Standby.
Notes:
• Be sure to set the CD receiver to
Standby, otherwise the timed operation
will not work.
• While a timed operation is in progress,
you can cancel it by pressing the
[TIMER] or [SLEEP] button.
To return to step 1 and start timer programming all
over again, press the [MENU / CLEAR] button at
any point in this procedure.
SUN
TUE
MON
Days Set Everyday
WED THU
SAT
FRI
Number of
programmed timer
Timer