Filter
Top Products
26
Connecting the Power Cord
When the power cord is connected to the AC outlet, the
DVD receiver enters Standby mode. The STANDBY
indicator lights up.
Understanding Common Operations
Press STANDBY/ON on the unit or on the remote con-
troller.
If you press the same button again, the unit will turn off
and enter Standby mode.
The DVD receiver is not completely shutdown in
Standby mode.
To completely shut down the DVD receiver, disconnect
the power cord from wall outlet.
Tip:
• When you start playing (or turn on the power to) an
Onkyo RI Dock, CD recorder or cassette tape deck
that is connected to the DVD receiver via an cable
and RCA/phono audio cables, the power to the DVD
receiver is automatically turned on. Also, if you turn
on or off the power to the DVD receiver, the power to
such a device is automatically turned on or off
(standby).
Turn VOLUME clockwise to increase the volume or
counterclockwise to decrease the volume on the DVD
receiver.
Press VOLUME +/– on the remote controller.
To wall outlet
STANDBY
indicator
VOLUME
STANDBY/ON
VOLUME
+/–
STANDBY/
ON
INPUT buttons
INPUT buttons
STANDBY
indicator
Turning the Unit On and Off Adjusting the Volume
Remote
controller
DVD receiver