Filter
Top Products
11
1. Connect the gray wire to the right
speaker’s positive terminal. This
terminal is usually marked with a
plus (+) sign or red mark.
2. Connect the violet wire to the right
speaker’s negative terminal. This
terminal might be marked with a
minus (–) sign or it might not be
marked at all.
3. Connect the white wire to the left
speaker’s positive terminal.
4. Connect the green wire to the left
speaker’s negative terminal.
Connecting the Antenna
Connect the vehicle’s antenna cable
to the antenna jack on the back of the
stereo.
Completing the Connections
Make sure you have securely made all
other connections, then plug the har-
ness’ connector into the stereo’s 14-
pin wiring socket. Reconnect the cable
to the vehicle’s negative (–) battery
terminal.
TESTING THE
CONNECTIONS
Turn on your vehicle’s ignition and in-
stall your stereo’s control panel (see
“Installing the Control Panel” on
Page 15).
ON/OFF
lights. Then press
ON/OFF.
The stereo’s buttons and dis-
play light.
If the stereo does not work,
immedi-
atel
y
disconnect the cable from
y
our vehicle’s ne
g
ative (–) batter
y
terminal.
Then recheck your connec-
tions.
After you verify that the buttons/dis-
play light, follow the instructions in
“Mounting the Stereo” on Page 12.
Caution:
If you played a CD while
testing the connections, be sure to re-
move the CD from the stereo before
continuing.
(illus)
(illus showing harness
being reconnected)
12-2154.fm Page 11 Wednesday, July 14, 1999 3:34 PM