Filter
Top Products
14
REMOVING THE STEREO
FROM THE DASH
If you ever want to remove the stereo
from the dash, follow these steps.
1. Disconnect the cable from your
vehicle’s negative (
–
) battery ter-
minal.
2. If you secured the stereo to an
existing mounting hole under the
dash, slide out the stereo to free
the mounting bolt from the mount-
ing hole.
Or, remove the bolt holding the
metal strap attached to the back
of the stereo.
3. Press
RLS
to remove the stereo’s
control panel.
4. Insert the supplied keys into the
slots at the left and right sides of
the stereo. Press the keys down-
ward and slide the stereo out of
the dash.
Note:
The keys are labeled to
show their top edges.
5. Remove the keys from the slots.
6. Disconnect the wire harness and
the antenna.
7. If you are mailing or shipping the
stereo, use a Phillips screwdriver
to reinstall the shipping screw in
the top of the stereo.
8. Reconnect the cable to the vehi-
cle battery’s negative (–) terminal.
(illus - show keys on slots)
12-2154.fm Page 14 Wednesday, July 14, 1999 3:34 PM