Filter
Top Products
22
CD PLAYER OPERATION
Cautions:
• Play only CDs that
have this mark on
them:
• The CD player has a wide
dynamic range. As a result, if you
turn your stereo’s volume up too
high during soft (low volume) sec-
tions of a program, your speakers
might be damaged when a sud-
den loud passage occurs.
• If the CD player is jolted during
play, the rotation speed might sud-
denly change or the CD player
might make an unusual noise.
This is not a malfunction.
PLAYING A CD
1. Press
ON/OFF
to turn on the ste-
reo.
2. Insert a CD (label side up) in the
slot. The stereo automatically
switches to CD play mode if the
radio is playing and displays
cd
In
. Then the display shows
,
cd
, and
TR01
, and the CD
starts to play from Track 1.
If a CD is already in the CD player
( appears on the display),
simply press
CD
to play the CD.
The stereo displays
cd
,
TR
, and
the number of the track you last
played, and the CD starts to play
from the point where you last
stopped it.
After the stereo plays the entire
CD, it automatically repeats all
tracks, starting with Track 1.
3. Press
+
or
–
to increase or
decrease the volume as desired.
Note:
See “Adjusting the Sound”
on Page 17 for information about
changing the stereo’s other set-
tings.
4. To pause playback, press
CD
.
TR
and the track number flash. To
resume play, press
CD
again.
Note:
If you pause a CD for more
than 5 minutes, the stereo turns
off.
5. To remove a CD from the CD
player, press .
EJ cd
appears.
(illus)
(illus)
(illus)
12-2154.fm Page 22 Wednesday, July 14, 1999 3:34 PM