Filter
Top Products
25
TROUBLESHOOTING
If your stereo’s CD player is not working as it should, it displays an error indicator. If
it is a numbered error, it ejects the CD. Try these suggestions.
If the stereo still does not operate properly, the connecting pins in the recess or on
the back of the control panel might be dirty. Use a soft cloth or a contact cleaner
(such as Cat. No. 64-4340) to clean them.
If the stereo still does not operate properly, take it to your local RadioShack store
for assistance.
Indicator Problem Suggestion
E01
Loading and/or unloading
operation fails.
Make sure a CD is loaded. If it
is not, insert the CD properly. If
it is, eject the CD and load it
again.
E07
The CD is loaded incorrectly. Reload the CD with the label
side up.
The CD is dirty or defective. Clean the CD (see “CD Care
Tips” on Page 28) or try anoth-
er CD.
no cd
No CD is loaded. Load a CD.
(illus)
12-2154.fm Page 25 Wednesday, July 14, 1999 3:34 PM