Filter
Top Products
21
Note: Do not hold down the memory
channel button. This stores the cur-
rently tuned station into that location.
To select a station you automatically
stored in automatic travel program-
ming memory, follow these steps:
1. Repeatedly press
BND
to select
the desired band (
AM
,
FMI
, or
FMII
).
2. Press
ATP
for less than 1 second
to select the desired memory sta-
tion. Each time you press
ATP
, the
stereo advances to the next mem-
ory channel.
Notes:
• Do not hold down
ATP
. This
causes the stereo to automati-
cally scan and store the first 6
strong stations it finds into its
automatic travel programming
memory.
• If the stereo could not find any
strong stations,
P - x - - -
(where
x
is one of the stereo’s
6 channel numbers) appears for
the empty channels.
Scanning Stored Stations
The radio can scan all stored stations
in the selected band, pausing for 5
seconds at each station.
To start scanning stations you manu-
ally stored, repeatedly press
BND
to
select the desired memory group, then
hold down
BND
until
SCN
appears.
To scan the stations in the automatic
travel programming memory, repeat-
edly press
BND
to select the desired
band, press
ATP
so
ATP
appears,
then hold down
BND
until
SCN
ap-
pears.
As the radio scans each memory
channel,
P-
and the channel number
flash and the frequency is displayed.
After scanning all memory channels,
the stereo returns to the original sta-
tion.
To stop scanning when the radio
pauses at a station you want to listen
to, press
BND
again during the pause.
12-2154.fm Page 21 Wednesday, July 14, 1999 3:34 PM