Filter
Top Products
18
CQ-BT5107U
Bluetooth
®
- Hands-Free Phone
Incoming call rejection
Hold down [PHONE] for more than 2 seconds
during a call incoming.
Outgoing call termination
Hold down [PHONE] for more than 2 seconds
during making a call. (When other party does
not answer the call.)
Setting of automatic answering function
Hold down [PHONE] for more than 2 seconds
at the standby state.
The automatic answering function toggles between
ON and OFF every time
[PHONE] is held down for
more than 2 seconds.
(Automatic answering deactivated)
(Automatic answering activated)
[VOLUME]
(SEL)
Use of voice dial
1
Hold down [d] for more than 2 seconds at
the standby state.
2
Pronounce the name registered on the
telephone directory.
If the name matches with a piece of data on the
telephone directory registered with the mobile
phone, the telephone number of the name is
dialed.
Note: The Bluetooth
®
mobile phone itself must be
equipped and support voice dial function.
Switching between the private mode*
and hands-free mode
Press [BAND] during a call.
The private mode and hands-free mode switch
alternately every time
[BAND] is pressed.
(Private mode)
(Hands-free mode)
* The private mode is defined as the mode where
conversation is conducted with the mobile phone
in a usual manner without the hands-free function.
Phone answering
Press [PHONE] during a call incoming.
The Bluetooth
®
indicator ( ) blinks during a call
incoming/making a call.
Notes:
¡During a call incoming, the volume of this unit
automatically switches to 18, it restores to the
original volume setting when phone answering or
call rejecting.
¡If the automatic answering function is activated,
conversation can be automatically started after
receiving a call. (Refer to the below.)
Phone hanging up
Press [PHONE] during a call.
CQ̲BT5107U 10/11/04 10:30 ページ 18