Panasonic CQ-BT5107U Car Stereo System User Manual


 
38
CQ-BT5107U
Specifications
General
Power Supply: 12 V DC (11 V – 16 V), test
Voltage 14.4 V, Negative
@
ground
Current consumption: Less than 2.5 A (CD mode,
0.5 W 4-speaker)
Maximum Power Output:45 W × 4 channels at 400 Hz,
Volume Control maximum
Tone adjustment range:
Bass: ± 12 dB at 100 Hz
Treble: ± 12 dB at 10 kHz
Power Output:
18 W per channel into 4 Ω,
40 to 30 000 Hz at 3 % THD
Suitable Speaker
Impedance: 4 – 8 Ω
Dimensions (W x H x D): 178(W) x 50(H) x 160(D) mm
{7" x 1-15/16" x 6-5/16"}
Weight: 1.4 kg {3 lbs. 1 oz.}
Front AUX Input
Input impedance: 10 kΩ
Maximum input level: 2.0 V
Connector: 3.5 mm ø stereo mini pin
Input sensitivity: 200 mVrms
FM Stereo Radio
Frequency Range: 87.9 – 107.9 MHz
Usable Sensitivity: 12 dBf (1.1 µV/ 75 Ω,
S/N 30 dB)
50 dB Quieting Sensitivity
:17 dBf (1.8 µV/ 75 Ω)
Frequency Response: 30 – 15 000 Hz ± 3 dB
Alternate Channel
Selectivity: 75 dB
Stereo Separation: 35 dB at 1 kHz
Signal/Noise Ratio: 70 dB (Mono)
AM Radio
Frequency range: 530 kHz – 1 710 kHz
Usable sensitivity: 28 dB/µV (25 µV, S/N 20 dB)
Weather Band Radio
Frequency range: 162.400 – 162.550 MHz
Usable sensitivity: 3 dB/µV (S/N 20 dB)
Signal/Noise Ratio
(40 dB/µV): 50 dB
CD Player
Sampling Frequency: 8 times oversampling
DA Converter: 1 bit DAC System
Pick-Up Type: Astigma 3-beam
Light Source: Semiconductor laser
Wavelength: 790 nm
Frequency Response: 20 – 20 000 Hz (±1 dB)
Signal to Noise Ratio: 96 dB
Wow and Flutter: Below measurable limits
Channel Separation: 75 dB
Bluetooth
®
Communication
Frequency: 2 402 MHz – 2 480 MHz
Number of Channels: 79 Channels
Communication Mode: Frequency Hopped Spread
Spectrum Communication
RF Output: 0 dBm (0.8 mW)
Service Area: Within 10 m
Applicable Bluetooth
®
Version: Version 2.1 + EDR
Above specifications comply with EIA standards.
Note: Specifications and the design are subject to
modification without notice due to improvements in
technology.
Bluetooth QD ID B016993.
Power Output:
16 W RMS x 4 Channels at 4 Ω and 1% THD+N
Signal to Noise Ratio:
85 dBA (reference: 1 W into 4 Ω)
CQ̲BT5107U 10/11/04 10:30 ページ 38