Filter
Top Products
34
CQ-BT5107U
Installation Guide (continued)
Securing of the main unit
1
2
3
First complete the electrical connections, and then check them for correctness.(a page 36)
The included Mounting Collar q is designed specially for this unit. Do not use it to attach any other model.
Insert Mounting Collar q into the dash-
board, and bend the mounting tabs out
with a screwdriver.
Establish the rear connection of the unit.
After fixing Power Connector, fix the rear of the unit
to the vehicle body by either method (a) or (b)
shown in the previous page.
After installation reconnect the negative
(–) battery terminal.
The tabs to be bent vary depending on
the vehicle. To securely install the unit,
fully bend a number of the tabs so that
there is no rattling.
Example:
Tab
q Mounting
Collar
Mounting Holes
Mounting Bolt
Power Connector
Mounting springs
Engage the Mounting
Springs in the mount-
ing holes of the
Mounting Collar q
firmly.
Mounting Spring
Mounting
Hole
Caution
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands
and fingers.
CQ̲BT5107U 10/11/04 10:30 ページ 34