Filter
Top Products
9
CQ-BT5107U
The 12-hour (AM/PM) system is used for the clock
adjustment.
1
Press [CLOCK].
(Clock display)
2
Hold down [CLOCK] for more than 2
seconds.
Hour blinks
3
Adjust the hour.
[d]
: Sets ahead.
[s] : Sets back.
Hour entered
4
Press [CLOCK].
Minute blinks
5
Adjust the minute.
[d]
: Sets ahead.
[s] : Sets back.
Minute entered
6
Press [CLOCK].
Completed
Notes
:
¡Clock can not be adjusted when the unit is power
off, to perform clock setting when the unit is
power on.
¡When “NO DISC” is displayed, the clock can not
be adjusted.
¡Clock time is displayed when the unit is power
off.
¡“CLK ADJ” is displayed when the clock is not
adjusted.
¡Hold down [d] or [s] to change numbers
rapidly.
¡When you want to readjust the time, repeat steps
2 to 6.
¡When the unit is power off, press [DISP] to turn
ON/OFF the key illumination of this unit.
Preparation
First time power on
Clock adjustment
1
Turn the key in the ignition until the
accessory indicator lights.
2
Press [POWER].
*Indicator for AM or
PM time
CQ̲BT5107U 10/11/04 10:30 ページ 9