Panasonic CQ-VA707N Car Video System User Manual


 
67
CQ-VA707N
E
N
G
L
I
S
H
64
Specifications
Power Supply : 12 V DC (11 V - 16 V), test voltage 14.4 V negative ground
Current Consumption : 7 A (at rated VTR operation output)
Audio Input Sensitivity : 0.5 Vrms (VTR)
Pre-output Voltage : 4 V (CD Changer Play Mode; 1 kHz 0 dB)
Video input signal : Composite video signal, 1.0 Vp-p (75 )
Video output signal : Composite video signal, 1.0 Vp-p (75 )
Dimensions
Display Unit : 178 (W) x 50 (H) x 160 (D) mm
Control Unit : 215 (W) x 41 (H) x 150 (D) mm
Weight
Display Unit : 1.9 kg
Control Unit : 1.2 kg
kg)
Liquid Crystal Panel : 7 inches wide
Screen Dimensions : 156 (W) x 87 (H) x 178 (D) mm
Number of Pixels : 336,960 pixels (234 vertical x 480 horizontal x 3)
Valid Pixel Ratio : over 99.99 %
Display Method : Transparent color filter format
Drive Method : TFT (Thin Film Transistor) active matrix format
Light Source : Internal light (built-in small fluorescent lamp)
Speaker : 36 mm round speaker (one)
Sound Output : 0.7 W
FM Stereo Radio
Frequency Range : 87.5 108 MHz
Usable Sensitivity : 8 dB/µV (S/N 30 dB)
Stereo Separation : 35 dB (at 1 kHz)
MW Radio
Frequency Range : 531 - 1,602 kHz
Usable Sensitivity : 28 dB/µV (S/N 20 dB)
LW Radio
Frequency Range : 153 - 279 kHz
Usable Sensitivity : 35 dB/µV (S/N 20 dB)
Control Unit
Display Unit
General
Note: Specifications and design are subject to modification without notice due to improvements in tech-
nology.