C2988M-A (6/11) 17
DISPLAY SETTINGS
This menu is used for common source adjustments. To select the Display Settings menu options and ranges, press the right and left
arrows◀ or ▶on the remote control or the control panel, and then press ENTER.
The following table lists the display settings, menu options/ranges, and the default settings.
NOTES:
• The maximum number of connecting devices for tiling mode is DVI = 9, VGA = 4, and Video = 4.
• The maximum cable length between displays for tiling mode is 3 meters.
Table D. Display Settings
MAIN
Settings Menu Options/Ranges Default
Aspect Ratio Full screen, Pillar Box, Letter Box, and
Native
Full Screen
Zoom 0 to 10 0
Auto Scan On, Off On
Select Source VGA, HDMI1, HDMI2, DVI, DisplayPort,
S-Video, Video, and Component
VGA
PIP
PIP Mode Off, Large PIP, Medium PIP, Small PIP, and
Side-by-Side
Off
PIP Position Bottom-Right, Top-Left, Top-Right, and
Bottom-Left
Bottom-Right
Aspect Ratio Full Screen, Pillar Box, and Letter Box Full Screen
Side-by-Side Scale Zoom In, Zoom Out, Main, PIP, Default,
and Return
—
Auto Scan On, Off On
Select Source HDMI1, HDMI2, DVI, DisplayPort,
Component, S-Video, and Video
VGA for Main, Video for PIP
