Pioneer AVH-P5000DVD Car Speaker User Manual


 
! If you select Linear PCM, when playing a
disc recorded on a dual mono mode, you
can operate this function. (Refer to Setting
for digital output on page 40.)
% Touch L/R SELECT on the function menu
to select the audio output.
Touch L/R SELECT repeatedly until the desired
audio output appears in the display.
! L+R left and right
! LEFT left
! RIGHT right
! MIX mixing left and right
Note
Depending on the disc and the playback location
on the disc, the function may not be selectable,
indicating that operating this function is not pos-
sible.
Using compression
Using the COMP (compression) function lets
you adjust the sound playback quality of this
unit.
% Touch COMPRESSION on the function
menu to select your favorite setting.
OFFCOMP1COMP2
Playing songs on iPod
Basic Operations
You can use this unit to control an iPod by
using a cable (e.g., CD-I200), which is sold se-
parately.
1 Source icon
2 Repeat indicator
Shows when repeat range is set to ONE or
ALL.
3 Song number indicator
4 Title indicator
5 Shuffle indicator
Shows when random play is set to SONGS or
ALBUMS.
6 Play time indicator
7 Song information
Shows detailed information of currently play-
ing song.
8 Battery charging indicator
Shows when the battery charge setting is on.
1 Connect the iPod to this unit.
Playback will automatically start.
While connected to this unit, PIONEER, Acces-
sory Attached or
(check mark) is displayed
on the iPod.
# Before connecting the dock connector of this
unit to the iPod, disconnect the headphones from
the iPod.
# Depending on the model of iPod or the data
size in the iPod, there may be a delay to start play-
ing after connection.
# After the iPod has been connected to this
unit, use touch panel keys to select the iPod.
# When removing the iPod from this unit, this
unit is turned off.
Operating this unit
En
29
Section
03
Operating this unit