Filter
Top Products
En
23
English
Español
Deutsch
Français
Italiano
Nederlands
05
Section
Tuner
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1 Press 5 or ∞ in the TUNER MENU to
select LOCAL, and press A.MENU.
LOCAL adjustment indications are displayed.
2 Press 2 or 3 to set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: OFF—1—2—3—4
AM: OFF—1—2
The 4 setting allows reception of only the
strongest stations, while lower settings let you
receive progressively weaker stations.
Storing the strongest broadcast
frequencies
BSM (Best Station Memory) lets you automati-
cally store the six strongest broadcast frequen-
cies. The stored frequencies are displayed.
Once stored in memory, you can easily select a
desired frequency from the displayed list (refer
to page 22).
1 Select BSM from the TUNER MENU, and
press A.MENU.
BSM adjustment indications are displayed.
2 Press 5 to turn BSM on.
BSM begins to flash. While BSM is flashing the
six strongest broadcast frequencies will be
stored in order of their signal strength. When
finished, BSM stops flashing.
• To cancel the storage process, press ∞.
Notes
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 AM stations can be stored in
memory.
• You can also use 5 and ∞ to recall radio sta-
tion frequencies assigned to PRESET TUNING
buttons.
• If there are fewer than six strong broadcast
frequencies, previously stored frequencies
may remain in memory.