Filter
Top Products
En
27
English
Español
Deutsch
Français
Italiano
Nederlands
06
Section
Built-in CD Player
Entering disc titles
Disc title input lets you input CD titles up to 10
letters long and up to 48 disc titles into the built-
in CD player.
1 Play a CD that you want to enter the title.
2 Press 5 or ∞ to select TITLE EDIT from the
CD MENU, and press A.MENU.
TITLE EDIT adjustment indications are
displayed.
• When playing a CD TEXT disc, you cannot
select to TITLE EDIT. The disc title will have
already been recorded on a CD TEXT disc.
3 Press A.MENU to select the desired charac-
ter type.
Press A.MENU repeatedly to switch between the
following character type:
Alphabet (upper case), Numbers and Symbols—
Alphabet (lower case)
4 Press 5 or ∞ to select a letter of the alpha-
bet.
Each press of 5 will display a letter of the alpha-
bet in A B C ... X Y Z, numbers and symbols in 1 2
3 ... @ # < order. Each press of ∞ will display a
letter in the reverse order, such as Z Y X ... C B A
order.
5 Press 3 to move the cursor to the next
character position.
When the letter you want is displayed, press 3
to move the cursor to the next position and then
select the next letter. Press 2 to move back-
wards in the display.
6 Move the cursor to the last position by
pressing 3 after entering the title.
When you press 3 one more time, the entered
title is stored in memory.
7 Press BAND/ESC to return to the playback
display.
Notes
• Titles remain in memory, even after the disc
has been removed from built-in CD player, and
are recalled when the disc is reinserted.
• After data for 48 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.
• If you connect a multi-CD player, you can
input disc titles for up to 100 discs.