Filter
Top Products
En
54
11
Section
Audio Adjustments
Setting the sound focus equalizer
Clarifying the sound image of vocals and instru-
ments allows the simple staging of a natural,
pleasant sound environment.
Even greater listening enjoyment will be
obtained if seating positions are chosen care-
fully.
• FRT1 boosts the treble on the front output and
the bass on the rear output.
FRT2 boosts the treble and the bass on the front
output and the bass on the rear output. (The
bass boost is the same for both front and rear.)
For both FRT1 and FRT2 the H setting provides a
more pronounced effect than the L setting.
1 Press SFEQ on the head unit to select the
desired SFEQ mode.
Press SFEQ on the head unit repeatedly to
switch between the following sound focus
equalizer.
FRT1-H (front1-high) —FRT1-L (front1-low) —
FRT2-H (front2-high) —FRT2-L (front2-low) —
CUSTOM (custom) —OFF (off)
2 Press 2 or 3 to select the desired position.
Press 2 or 3 until the desired position appears
in the display.
LEFT (left) —CENTER (center) —RIGHT (right)
Notes
• If you adjust the bass or treble, CUSTOM
memorizes an SFEQ mode in which the bass
and treble are adjusted for personal prefer-
ence.
• If you switch the SFEQ mode, the HPF func-
tion is automatically switched off. By switch-
ing the HPF function on after selecting the
SFEQ mode, you can combine HPF function
with SFEQ function.
Using balance adjustment
You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1 Press 5 or ∞ to select AUDIO from the
MENU, and press A.MENU.
AUDIO MENU is displayed.
2 Select FAD/BAL (or BAL) and press A.MENU.
FADER/BALANCE adjustment indications are
displayed.
Each press of 5 or ∞ moves the front/rear
speaker balance towards the front or the rear.
• FRONT:15 – REAR:15 is displayed as the
front/rear speaker balance moves from front to
rear.
• FR:00 is the proper setting when only two
speakers are used.
• When the rear output setting is REAR SP:S.W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 60.
3 Press 2 or 3 to adjust left/right speaker
balance.
When you press 2 or 3, LR:0 is displayed. Each
press of 2 or 3 moves the left/right speaker
balance towards the left or the right.
• LEFT:9 – RIGHT:9 is displayed as the left/right
speaker balance moves from left to right.
En
54