Filter
Top Products
DVD
En
51
Specifying time
You can specify a time from which playback
starts (Time search).
1 Push the remote controller’s joystick
left/right to select Time in Information
Display 1.
The selected item is indicated in green.
2 Input the desired time with the remote
controller’s number keys.
e.g.,
10 minutes 09 seconds: press 1, 0, 0, and 9 in
order.
78 min 00 sec: press 7, 8, 0 and 0 in order.
Press C to delete input numbers.
3 Press the remote controller’s joystick
directly down to complete selection.
Notes
• Some discs may feature a prohibited mark,
indicating that display of Title and Chapter
indications is not possible.
• You cannot specify a Time in the Stop mode.
• If you perform no operation for about eight
seconds, the specified number becomes
invalid.
Switching audio, subtitle and angle
You can change audio, subtitle and angle if that
information is recorded on the disc.
1 Push the remote controller’s joystick
left/right to select Audio, S.TITLE or ANGLE in
Information Display 1.
The selected item is indicated in green.
2 Push the remote controller’s joystick
up/down to select a desired setting, and
press.
Note
• You can change audio, subtitle and angle
settings during playback with AUDIO, S.TITLE
and ANGLE.
Operating with Information
Display 2
With Information Display 2, you can set Repeat
play range and audio L/R settings. You can also
specify a Title, Chapter and Time.
English
Español
Deutsch
Français
Italiano
Nederlands
10
Section