Filter
Top Products
2 Touch TV SIG to select an appropriate
TV signal.
Touching TV SIG switches TV signal settings
in the following order:
AUTO—PAL—NTSC—PAL-M—SECAM
Note
About your country TV signal, consult with your
nearest Pioneer dealer.
Other Functions
Introduction of setup adjustments
Important
Following function cannot be operated in your
area. (Inoperable function is indicated in grays-
cale.)
— R.DISP
1
1 Setup menu display
Shows the setup function names.
% Press A.MENU button and touch SETUP
to display the setup function names.
The setup function names are displayed and
operable ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
Note
If you do not operate the setup function within
about 30 seconds, the display is automatically re-
turned to the source display.
Setting the AV input
You can switch the setting according to the
connected component.
! Select VIDEO to watch video of a con-
nected component as AV source.
! Select M-DVD to watch video of a con-
nected DVD player as S-DVD source.
Operating this unit
En
45
Section
03
Operating this unit