Filter
Top Products
Black plate (12,1)
12 CRD3580-A/N
Listening to the radio
1 3
2
5
4
6
7
6
8
5
7
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 14.
1 Band indicator
Shows which band the radio is tuned to, AM
or FM.
2 Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
3 Frequency indicator
Shows to which frequency the tuner is
tuned.
4 SOURCE button
Press to select the tuner as the source.
5 BAND button
Press to select among three FM and one
AM band.
6 c/d buttons (Manual or seek tuning)
Press to tune in a radio station.
7 VOLUME button
Press to increase or decrease the volume.
8 TUNER button
Press to select the tuner as the source.
1 Press SOURCE on the head unit, or
TUNER on the remote, to select the tuner.
Press SOURCE or TUNER until you see Tuner
displayed.
2 Use VOLUME to adjust the sound
level.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1, F2, F3 for FM or AM.
4 To perform manual tuning, press c
or d with quick presses.
The frequencies move up or down step by
step.
5 To perform seek tuning, press and
hold c or d for about one second and
release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
Tuner
04
En
12
Section