Filter
Top Products
Black plate (26,1)
26 CRD3580-A/N
Playing a CD
1
2 3
8
6
5
4
7
9
6
7
8
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 28.
1 Disc number indicator
Shows the disc currently playing.
2 Track number indicator
Shows the track currently playing.
3 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
4 SOURCE button
Press to select the multi-CD player as the
source.
5 16 buttons (Disc number search)
Press to select a disc from the multi-CD
player.
6 c/d buttons (Track search and FF/
REV)
Press to select a track from the current CD
and for fast forward and reverse.
7 a/b buttons (Disc search)
Press to select a disc from the multi-CD
player.
8 VOLUME button
Press to increase or decrease the volume.
9 CD button
Press to select the multi-CD player as the
source.
1 Press SOURCE on the head unit, or
CD on the remote, to select the multi-CD
player.
Press SOURCE or CD until you see Multi-CD
displayed.
2 Use VOLUME to adjust the sound
level.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
3 Select a disc you want to listen to
with the 16 buttons.
For discs located at 1 to 6, press the corre-
sponding number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as 1 for disc 7, until the disc number ap-
pears in the display.
Multi-CD Player
07
En
26
Section