Filter
Top Products
Black plate (50,1)
50 CRD3580-A/N
Specifications
General
Power source .............................14.4V DC (10.8 15.1 V
allowable)
Grounding system................... Negativetype
Max. current consumption
.....................................................10.0 A
Dimensions (W ×H × D):
Chassis ...............................178 × 100 × 160 mm
(7 ×3-7/8 × 6-1/4 in)
Nose..................................... 170 × 94 × 13 mm
(6-3/4 ×3-3/4 × 1/2 in)
Weight ..........................................2.0 kg (4.4lbs)
Audio/DSP
Continuous power outputis 22 W perchannel minimum
into 4ohms, both channels driven50 to 15,000 Hzwith
no morethan 5% THD.
Maximum power output.......50 W × 4
50 W× 2/4 W+ 70 W ×1/2
W (forsubwoofer)
Load impedance ......................4 W (4 8 W[2 W for1 ch]
allowable)
Preoutmax output level/output impedance
.....................................................2.2 V/1 kW
Loudness contour ...................+10 dB (100 Hz), +7dB (10
kHz) (volume: 30 dB)
Equalizer (9-Band GraphicEqualizer):
Frequency ..........................50/100/200/400/800 Hz
1.6/3.15/6.3/12.5 kHz
Equalization range ........±12 dB
Network:
HPF:
Frequency ................50/80/125 Hz
Slope..........................12 dB/oct
Subwoofer:
Frequency ................50/80/125 Hz
Slope..........................18 dB/oct
Gain ............................+6 15 dB
Phase ........................Normal/Reverse
CD player
System ..........................................Compact discaudio system
Usable discs ..............................Compact disc
Signal format:
Sampling frequency .....44.1kHz
Number of quantizationbits
...........................................16; linear
Frequency characteristics ...5 20,000Hz (±1 dB)
Signal-to-noise ratio ............... 94 dB (1 kHz) (IHF-A
network)
Dynamic range .........................92 dB (1 kHz)
Number of channels ..............2 (stereo)
Cassette player
Tape ................................................Compact cassettetape
(C-30 C-90)
Tapespeed ..................................4.8 cm/sec
Fast forward/rewinding time
.....................................................Approx. 100 sec(C-60)
Wow & flutter .............................0.09 % (WRMS)
Frequency response:
Metal ................................... 30 19,000 Hz(±3 dB)
Stereo separation ....................45 dB
Signal-to-noise ratio:
Metal:
Dolby BNR IN .......67 dB (IHF-A network)
Dolby NR OUT.......61 dB (IHF-A network)
FM tuner
Frequency range ......................87.9 107.9 MHz
Usable sensitivity .....................9 dBf (0.8µV/75 W, mono,
S/N: 30dB)
50 dBquieting sensitivity .....15 dBf (1.5µV/75 W, mono)
Signal-to-noise ratio ............... 70 dB (IHF-Anetwork)
Distortion.....................................0.3 % (at 65 dBf, 1 kHz,
stereo)
Frequency response ............... 30 15,000 Hz(±3 dB)
Stereo separation ....................40 dB (at 65 dBf, 1 kHz)
Selectivity ....................................70 dB (2ACA)
Three-signal intermodulation (desired signallevel)
.....................................................30 dBf (two undesired
signal level: 100dBf)
AM tuner
Frequency range ......................530 1,710 kHz(10 kHz)
Usable sensitivity .....................18 µV (S/N: 20 dB)
Selectivity ....................................50 dB (±10kHz)
Note
Specifications and the design are subject to
possible modifications without notice due to
improvements.
Additional Information
En
50
Appendix