6
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a Powermatic Model HPS67 Horizontal Panel Saw. This manual contains instructions on installation,
safety precautions, general operating procedures, maintenance instructions and parts breakdown. This
machine has been designed and constructed to provide years of trouble free operation if used in
accordance with instructions set forth in this manual. If there are any questions or comments, please
contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web
site: www.wmhtoolgroup.com.
Specifications
Model number (3 Phase model)...................................................................................................... HPS67
Stock number (3 Phase model).....................................................................................................1791287
Model number (1 Phase model)...................................................................................................HPS67-1
Stock number (1 Phase model).....................................................................................................1791286
Main motor (3 Phase model)................................................................................. TEFC, 5 HP, 3Ph, 230V
Main motor (1 Phase model).................................................................................. TEFC, 3HP, 1Ph, 230V
Blade speed ..............................................................................................................................4500 RPM
Blade size............................................................................................................................. 12” (315 mm)
Arbor size....................................................................................................................................... 30 mm
Dado size (width x bore) ........................................................................................................ 13/16” x 5/8”
Cutting depth.......................................................................................................................... 4” (100 mm)
Scoring motor................................................................................................................................ .3/4 HP
Scoring blade size ..............................................................................................................100 to 120 mm
Scoring blade arbor ........................................................................................................................ 20 mm
Scoring blade speed..................................................................................................................6500 RPM
Sliding table carriage width ................................................................................................... 13” (330 mm)
Sliding table carriage stroke................................................................................................ 67” (1700 mm)
Rip capacity........................................................................................................................ 50” (1270 mm)
Main and scoring blade tilt ............................................................................................... 90 to 45 degrees
Main table size cast iron .....................................................................................37” x 20” (940 x 508 mm)
Right side extension table...................................................................................31” x 18” (790 x 460 mm)
Rear extension table size....................................................................................30” x 20” (760 x 500 mm)
Working table height............................................................................................................. 34” (860 mm)
Crosscut table size ...........................................................................................42” x 20” (1060 x 510 mm)
Crosscut fence size with extension ................................................................................... 101” (2565 mm)
Mitre Fence length with flip stop, clamp................................................................................. 31” (790 mm)
Overall size .............................................................................. 122” x 54” x 93” (3100 x 1370 x 2360 mm)
Dust collection ports (two)....................................................................................................... 4” (100 mm)
Gross weight ............................................................................................................... 1,100 lbs. (500 kg.)
Net weight ...................................................................................................................... 902 lbs. (410 kg.)
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.