– 9 –
– 8 –
Source Unit Design
1. BAND – Selects which bank of tuner presets (FM1/FM2/
FM3/AM1/AM2) should be active.
2. POWER – Turns the source unit on and off.
3. EJECT – Ejects the CD from the in-dash CD player.
4. DISP – Switches the source unit between the clock and the
currently selected mode (TUNER/CDP/CDX/AUX*).
5. MODE – Selects between TUNER/CDP/CDX/AUX* modes.
6. MENU – Selects between Volume/Bass/Treble/Balance/
Fader/Sum** modes.
7. SEEK/TRACK – Selects the previous/next radio station in
TUNER mode and selects the previous/next track in
CDP/CDX mode.
8. PRESET 1/SCAN – Selects radio preset #1 in TUNER mode
and scans each track on the disc in CDP/CDX mode.
9. PRESET 2/RPT – Selects radio preset #2 in TUNER mode
and repeats the current track in CDP/CDX mode.
QUICK LOOK FEATURES RFX8210 RFX8220 RFX8230 RFX8810
Next/Previous Track X X X -
Programmable Eject Mute Off X X X -
Insert Disc Power Up/Play X X X -
Pause/Resume Play X X X -
Programmable Disc Titles - - X -
Pre Amp/Power
Source Tone Memory X X X -
Switchable Loudness X X X -
Electronic Volume, Tone, Balance X X X -
Internal Audio Amplifier 25 watts RMS 25 watts RMS 25 watts RMS -
(40 max) x 4 (40 max) x 4 (40 max) x 4
Number of Preouts 4 RCA 6 RCA 6 RCA -
Front/Rear Sum Preout (#5 & #6) - X X -
Preout Voltage 2.4 volts RMS 2.4 volts RMS 2.4 volts RMS -
Low Source Impedance < 100Ω < 100Ω < 100Ω -
External Audio Inputs (AUX-IN) - - X -
Remote Functions IR optional IR included IR included -
Tuner, CD and Changer Mode X X X X
Volume Up/Down X X X X
Seek (Track) Up/Down X X X X
Fast Forward/Reverse X X X X
Tune (Disc) Up/Down X X X X
Pause/Resume Play X X X X
Direct Preset Access X X X -
Direct Track Access X X X X
Direct Disc Access - - - X
CD Changer Control
Dual 1-bit D/A Converters X X X X
w/ 8 x oversampling
CD Changer Controller X X X -
Changer Repeat Mode X X X X
Changer Random Play X X X X
Pause/Resume Play X X X X
Changer Track Scan X X X X
Changer Disc Scan X X X X
*Features available on RFX8230 only
**Features available on RFX8220 & RFX8230 only