Loading Disc to the Magazine
1. Pull out the desired disc tray number from the
magazine
2. Place the disc into the magazine label side up
3. Push the disc tray back into the magazine
NOTE: Discs numbers are arranged from the top
down
Loading the Magazine to the CD Changer
1. The INSERT IN THIS DIRECTION arrow indi-
cates the proper direction that the magazine
should be loaded into the CD changer
CAUTION
Avoid installing or leaving the magazine where
it would be subject to high temperatures such
as from direct sunlight or from hot air from the
heater. Doing so will damage the unit.
L
OADING THE
CD C
HANGER
– 41 –
Disc Eject
1. Press the EJECT button to release the disc from
the CD player
2. The source unit will revert to P.PLAY or EJ MUTE
mode (see TUNER OPTIONS in this manual for
further information on programming the default
mode)
3. After ignition is turned off, it is possible to eject
disc. However, this function may only be
performed once with ignition off.
LCD Display
1. The LCD will display EJECT for 5 seconds
2. After 5 seconds, the LCD will revert to the
previous display
Auto Reload
1. If the CD is left in the ejected position for more
than 10 seconds the disc will automatically
reload into the CD player
2. The auto reload operation will not restart play-
ing the disc or affect any other current mode
(Except EJ MUTE Mode)
– 40 –
B
UTTON
F
UNCTION
D
ISC
E
JECT
*
CD Changer Operation
(Optional Accessory)
*NOTE: This function works in CD Player mode only.