Filter
Top Products
Display Recall temporarily displays the clock, radio sta-
tion, station title**, CD track/time or disc title* or aux on
the LCD for 5 seconds.
Display Recall (TUNER)
1. While in TUNER mode, press the DISP button to
cycle through CLOCK>RADIO STATION>STATION
TITLE**
2. After 5 seconds the LCD will revert to its default
Display Recall (CDP/CDX)
1. While in CDP/CDX mode, press the DISP button to
cycle through CLOCK>TRACK/TIME>DISC TITLE*
2. After 5 seconds the LCD will revert to its default
Display Recall (AUX)
1. While in AUX mode, press the DISP button to switch
between CLOCK>AUX*
2. After 5 seconds the LCD will revert to its default
Programming the Default Display
1. While in TUNER/CDP/CDX/AUX* mode, press and
hold the DISP button until display flashes (clock set
mode)
2. Press the MODE button to cycle through the available
default displays
3. Release the MODE button for 1 second to lock-in the
selected display
4. Default displays can be programmed independently
for TUNER/CDP/CDX/AUX* modes
D
EFAULT
/R
ECALL
D
ISPLAY
– 25 –
Setting the Clock Hours
1. Press and hold the DISP button for 1 second
until the hour digits flash
2. Press the SEEK UP/DN button to set the hour (be
sure to select proper AM/PM setting)
Setting the Clock Minutes
1. Press and the DISP button a second time until
the minute digits flash
2. Press the SEEK UP/DN button to set the minutes
Considerations
1. The clock will be displayed when the radio
power button is turned off
2. Pressing the DISP button will display the clock
for 5 seconds when an alternative default dis-
play is selected (see DEFAULT/RECALL DISPLAY
in this section for more information on program-
ming the default display).
– 24 –
C
LOCK
O
PERATION
(press & hold)
(press again)
AM 12:00
F1 101.5
KZON
AM 12:00
04 01:27
JANET J
AM 12:00
AUX
*Features available on RFX8230 only
**Features available on RFX8220 & RFX8230 only