Filter
Top Products
– 45 –
Magazine Eject
1. Press the EJECT button to release the magazine
disc from the CD changer
2. The source unit will revert to TUNER mode
NOTE: A disc may be ejected during any mode or if
the radio power/ignition is off
LCD Display
1. The LCD will display NO CD
CD Changer Reset
Press the RESET button if the changer gets jammed
during operation
– 44 –
CDX E
JECT
/R
ESET
•
RESET
AUX Mode
1. Press the MODE button until AUX is displayed
2. The AUX input will immediately "see" the
auxiliary audio input being fed into the AUX
RCA jacks
LCD Display
1. AUX will be displayed for 5 seconds
2. After 5 seconds the LCD will revert to the
default display
NOTE: The input signal connected to the AUX
RCA jacks is fed into the source unit prior
to the volume control. If the AUX input
source has a constant (non-adjustable) out-
put level, the volume control on the face-
plate can properly adjust the amplitude.
The maximum signal the AUX circuit can
accept without clipping is 2.4V RMS.
More than 2.4V RMS input voltage can be
applied to the circuit, however the signal
will be clipped (producing gain overlap).
AUX M
ODE
*
*Feature available on RFX8230 only
TUNER
CDP
CDX
AUX
A
UXILIARY
O
PERATION