Filter
Top Products
10
Using the diversity receiver
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto
Lock” menu item (see page 16). If the lock mode is activated, you have to
temporarily deactivate it in order to be able to operate the receiver:
The lock mode icon ቦ flashes prior to the lock mode being activated again.
Selecting a standard display
For more detailed information, refer to the chapter “Overview of the
displays” on page 6.
̈ Press the SET button.
“Locked” appears on the display panel.
̈ Press the rocker button.
“Unlock?” appears on the display panel.
̈ Press the SET button.
– When you are in the operating menu, the lock mode remains
deactivated until you exit the operating menu.
– When one of the standard displays is shown, the lock mode
is automatically activated after 10 seconds.
̈ Press the ESC button to select a standard display. In stereo
mode (see page 16), you can alternatively press the rocker
button.
Contents of the display Selectable standard display
“Frequency/Name”
with “MUTE” display ቨ
“Frequency/Limiter”
with display of the audio channels
(Stereo/Focus) ቨ
“Frequency/High Boost“
with display of the audio channels
(Stereo/Focus) ቨ
SET
SET
MHz
823.925
ew300 IEM
AFRF
MUTE
P
ESC
MHz
823.925
ew300 IEM
AFRF
MUTE
P
Lim: - 6dB
B.CH 1.1
AFRF
P
EQ
823.925
AFRF
P
MHz