E 8
Dimension: 176 x 250 mm
M&M Printers Sdn. BhdCX68RF5_01-09E
Watching TV
Watching a TV programme
Simple operations for watching a TV programme.
With the number buttons (on remote control)
• To select a one-digit channel, such as 5, press
5
.
If “5-” is indicated, press
to select one-digit input, and then
press
5
again.
• To select a two-digit channel,
such as 15, press
to
select the two-digit input. Press
1
, and then press
5
.
• When the Standby indicator is red, either
CH
/
CH
on the TV can be pressed to turn on
the power.
• The channel number is displayed in green for channels tuned by auto tuning and displayed in yellow for
channels tuned using fine tuning.
• When the Standby indicator is red, the TV is in Standby mode and power is still supplied to the TV. If
you will not watch TV for a while, turn off the main power by pressing
POWER
on the TV set. Also, if
you will not be at home for a considerable length of time, unplug the cord from the outlet.
• The AV1 (or SAV1), AV2 (or COMPONENT) and AV3 (or SAV3) input channels can be selected using
TV/VIDEO
.
• Channels that have been skipped cannot be selected by
CH
/
CH
. See
18
.
• The on-screen displays in this manual may differ from their actual appearance.
1 Turn on power.
• When the Standby indicator is off, press
POWER
.
• When the
Standby indicator is red, press on the remote
control. The
Standby indicator changes to green and a picture
appears.
2 Select channel.
With
CH
/
CH
• Press
CH
and channels change as shown below.
1 / 2 / ... / 98 / 99 / AV1 (or SAV1) / AV2 (or COMPONENT) /
AV3 (or SAV3) / 0 / 1 / 2 ...
• Press
CH
and channels change as shown below.
1 / 0 / AV3 (or SAV3) / AV2 (or COMPONENT) / AV1 (or SAV1) /
99 / 98 / ... / 2 / 1 / 0 ...
3 Adjust volume using
/ .
• The volume bar disappears
approximately five seconds
after the volume has been
adjusted.
TV Set
VOLU
M
E19
POWER
Standby indicator
Behind the door
CH
CH
COMFY
VIEW
TV/VIDEO
FM RADIO
SOUND MODE
NORMAL
TV/TEXT
1 23
4 5 6
78
0
9
MENU
BACD
CHILD LOCK
CH
CH
1
5
CH
CH
––
–1
51