Sharp CX68RF5 Car Satellite TV System User Manual


 
E 48
Dimension: 176 x 250 mm
M&M Printers Sdn. BhdCX68RF5_46-51E
Connecting to video equipment
Enjoy playback from a video disc player, VCR or other video equipment by connecting
them to this TV set using the Audio/Video in terminals.
Example use of front terminals
Example use of rear terminals
The S-Video Terminal has the priority over the AV terminal.
The S-Video Terminal and Audio (L-R) terminals must be connected to playback DVD.
SAV1 (S-Video 1) and AV1 cannot be use or plug in at the same time, blur picture might be appear.
(SAV3 (S-Video 3) and AV3 as well)
Turn off the power on the TV set and the VCR being connected before making the above connections.
Be sure the cord plugs are fully inserted in the connection terminals.
For playback of monaural audio, connect the external source to the audio input left terminal on the front
or rear of the TV set (MONO) to hear the same sound from both speakers.
The audiovisual cords required to connect the TV set with video equipment may differ from those shown
in the above diagram. See the operation manual of your video equipment for connection details.
The above recording and editing connections are for intended solely for personal use and not for the
illegal copying of audiovisual material protected by copyright laws.
TV
Behind the door
VCR
Video Game
Camcorder
DVD Player
Yellow: To VIDEO
White: To AUDIO (L)
Red: To AUDIO (R)
To AUDIO/VIDEO
out terminals
To S-VIDEO
out terminal
AV-3 IN
To AUDIO/VIDEO
out terminals
To AUDIO
out terminals
To S-VIDEO out terminal
Yellow: To VIDEO
White: To AUDIO (L)
Red: To AUDIO (R)
For Recording and Editing
VCR
For Playback
VCR
TV
DVD Player
To AUDIO/
VIDEO in
terminals