Filter
Top Products
8
Initial auto installation
When the TV powers on for the first time after purchase, the
initial auto installation wizard appears. Follow the menu and
make the necessary settings one after another.
1
Press POWER on the TV.
• The initial auto installation wizard appears.
2
Press
a
/
b
to select your country channels listed on
the screen, and then press ENTER.
Press
a
/
b
to select “HOME” or “STORE”, and then
press ENTER.
HOME:
• “STANDARD” will be the default value for the “AV mode”
setting.
STORE:
• “DYNAMIC (FIXED)” will be the default value for the “AV
mode” setting. If the “AV mode” is changed, the TV will
automatically switch back to “DYNAMIC (FIXED)” when there
is no further change to TV setting for 30 minutes.
• The confi rmation screen appears only when selecting
“STORE”.
Press
a
/
b
to select “Yes” or “No”.
• To change the STORE mode to HOME mode, please refer to
page 13 to reset the unit.
Press
a
/
b
to select “DTV”, “ATV” or “DTV + ATV”,
and then press ENTER.
• Auto installation will be executed.
• You do not need to do anything during the auto search.
Checking Signal information
If you install a DVB-T antenna for the fi rst time or relocate it,
you should adjust the alignment of the antenna to receive a
good reception while checking the antenna setup screen.
ATV/DTVATV
/
DTV
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “ ” (Programme setup).
3
Press
a
/
b
to select “Digital setting”, and then press
ENTER.
4
Press
a
/
b
to select “Signal Information”, and then
press ENTER.
• The “Signal Information” screen will appear.
Auto installation
You can run auto installation again, even after setting up the
preset channels.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “ ” (Programme setup).
3
Press
a
/
b
to select “Auto installation”, and then
press ENTER.
If you have already set the password, enter it here.
• See page 12 for setting a password.
4
Press
a
/
b
to select your country channels listed on
the screen, and then press ENTER.
Press
a
/
b
to select “DTV”, “ATV” or “DTV + ATV”,
and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
Programme setup
Digital setting
You can reconfi gure DTV services settings automatically or
manually.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “ ” (Programme setup).
3
Press
a
/
b
to select “Digital setting”, and then press
ENTER. If you have already set the password, enter it
here.
• See page 12 for setting a password.
4
Press
a
/
b
to select the desired menu item, and then
press ENTER.
H
Auto search
Use this menu to add new services automatically after auto
installation has been completed.
H
Manual search
Add new services within a specifi ed frequency band.
• Press
c
/
d
to select the frequency and then press ENTER.
LC-32_39LE155X_EN_G121.indd 8LC-32_39LE155X_EN_G121.indd 8 12/10/2013 11:20:55 AM12/10/2013 11:20:55 AM