Sharp LC-32LE155X Car Satellite TV System User Manual


 
14
H
Auto volume
Different sound sources, fairly often do not have the same
volume level, for example the changing from movie to the
advertisements. Auto volume solves this problem and
equalises the volume levels. (On, Off)
H
Digital audio output
This function allows you to select your favourite audio output
system. (PCM, Auto, Off)
H
Speaker selection
You can choose to listen to the external amplifi er audio only.
(On, Off)
NOTE
This function only available when “Link operation” is set to “On”.
You need to use CEC compatible amplifi er to control external speaker
volume.
H
Audio only
When listening to music from a music programme, you can
set the display off and enjoy audio only.
Selected item Description
On
Audio is output without screen image.
Off
Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the TV such
as by changing the input source, the “Audio only” function is set to
“Off”.
H
Colour system
You can change the colour system to one that is compatible
with the image on the screen. (Auto, PAL, SECAM, NTSC
3.58, NTSC 4.43, PAL-60)
NOTE
• If “Auto” is selected, colour system for each channel is automatically
set. If an image does not display clearly, select another colour
system (e.g. PAL, NTSC 4.43).
• “Colour system” is selectable only when inputting a composite signal.
H
Fine sync. (PC input mode only)
Input signal
• Some input signals may have to be registered manually to
display properly.
• The pairs of input signals (resolutions) in the list below are
not distinguishable when received. In such case, you have
to set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
1280 g 768 1360 g 768
Option menu
H
Output volume select
Allows you to select what controls the audio output.
Selected item Description
Fixed
Sound via speakers is adjusted with VOL
k/l
on the remote control unit or the TV.
• Sound via the AUDIO OUT terminal is not
adjustable and constantly outputs.
Variable
• Sound via the AUDIO OUT terminal is
adjusted with VOL
k/l
on the remote
control unit or the TV.
• Sound via speakers is muted.
NOTE
• When “Output volume select” is set to “Variable”, all Audio menu
item cannot be adjusted.
H
Input select
For setting the signal type of external equipment.
Input source Selectable item
INPUT4
Component, Video
H
Audio select (HDMI input mode only)
You must select HDMI+Analogue if uses the AUDIO IN
(R/L) jack for analogue audio input when using INPUT 2 (HDMI)
terminal.
Option Description
HDMI
(Digital)
Select “HDMI (Digital)” if the Devices (DVD, Blu
ray Player, Set Top Box or etc.) is connected
using HDMI cable to INPUT 2 (HDMI) terminal.
HDMI+
Analogue
Select “HDMI+Analogue” if the Devices (PC
or etc.) is connected using DVI/HDMI convert
cable to INPUT 2 (HDMI) terminal and AUDIO
IN (R/L) jack is used to input Analogue Audio
Signals.
HDMI (Digital)
DVD player/PC
HDMI+Analogue
PC
LC-32_39LE155X_EN_G121.indd 14LC-32_39LE155X_EN_G121.indd 14 12/10/2013 11:20:56 AM12/10/2013 11:20:56 AM