Filter
Top Products
4
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1
Confi rm the screws supplied with the TV.
Soft cushion
S
E
RVICE
ONLY
/
AUDIO (R/L)
4
3
Screws (
m
5)
(used in step 2 and 3)
2
Insert and hook post guide into stand base slot holes. (
1
)
Fix the post using short screw. (
2
)
3
Insert the stand base to the stand post on the bottom of
the TV. (
3
)
4
Insert and tighten the 4 long screws into the 4 holes on
the bottom of the stand base. (
4
)
NOTE
• To detach the stand, perform the steps in reverse order.
CAUTION
• Do not attach or detach the stand without holding it.
Doing so can cause the stand to fall, resulting in serious personal injuries
as well as damage to the stand.
Antenna connection
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Room antenna terminal
(75-ohm type)
Antenna cable
(commercially available)
To antenna terminal
CAUTION
•
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.
• The illustration used throughout this manual are based on LC-32LE155X.
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box) and PC. To view external source images, select the input source from INPUT on the remote control
unit or INPUT on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top
Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
LC-32_39LE155X_EN_G121.indd 4LC-32_39LE155X_EN_G121.indd 4 12/10/2013 11:20:49 AM12/10/2013 11:20:49 AM