Sharp LC-32LE155X Car Satellite TV System User Manual


 
29
Protection against overturning
There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-resistant
measurement for your safety.
Anchoring the TV to the wall or a pillar
1
Fix the product with the 2 clamps (supplied), using the
screws (supplied).
2
Fix the TV to the wall using extra strong ties
(commercially available).
Fixing the TV to the table
LC-32LE155X
1
Lay the TV down on cushioning (such as a blanket)
over a table.
2
Attach the band (supplied) to the bottom of the stand
using the screw (supplied).
3
Transfer the product to the table where you intend to
fi x the TV.
4
Fix the TV to the table by the band with a screw
(commercially available).
• Use a screw (commercially available) whose shape is
compatible with the band.
LC-39LE155X
1
Transfer the product to the table where you intend to
fi x the TV.
2
Fix the TV to the table by the prevent angle with the
screws (commercially available).
• Use the screws (commercially available) whose shape is
compatible with the prevent angle.
CAUTION
As this product is heavy, use a table that is wide
enough to support the product and capable of
withstanding the product’s weight. The table should
be set where it will not be overturned.
Cup hook
(commercially available)
Clamps
(supplied)
Table
Thick soft cloth
(ex. Blanket)
Screw for band (supplied)
Stand
View from the top
Screws
(commercially
available
)
Table Restraining band (supplied)
Screws
(commercially
available
)
Table Prevent angle (supplied)
Restraining band (supplied)
Tie (commercially
available)
Wall
Screws for attaching clamps (supplied)
LC-32_39LE155X_EN_G121.indd 29LC-32_39LE155X_EN_G121.indd 29 12/10/2013 11:21:02 AM12/10/2013 11:21:02 AM