Filter
Top Products
28
E
Menu Items
COMMUNICATION SETTING
LAN SETUP
Congures the settings to control the monitor from the computer via LAN. (See page 36.)
IP CONTROL SETUP
To control the monitor from a computer via LAN, set this to ENABLE and congure the login ID and other settings. (See page 37.)
n
MONITOR
MONITOR
Selects the installation direction of the monitor.
LANDSCAPE ............Landscape orientation
PORTRAIT ...............Portrait orientation. MULTIMEDIA (see page 20) always remains in landscape orientation.
* If video is upside down when the monitor is installed in the portrait orientation, you can rotate the video 180 degrees with
PORTRAIT ROTATE (see page 30) in the FUNCTION menu. When this is done, the MONITOR setting cannot be changed.
STANDBY MODE
When STANDARD is selected, startup time from standby mode is reduced. Note, however that, more power will be consumed
in standby mode.
When LOW POWER is selected, current consumption is reduced while the monitor is in standby mode. Note, however, that the
startup time from standby mode becomes longer.
If set to LOW POWER, control via LAN cannot be performed in standby mode.
OFF IF NO OPERATION
Determines whether or not to set the monitor to go into standby mode when there is no operation from the remote control unit,
control commands, or LAN for over 4 hours.
OFF IF NO SIGNAL
Sets whether or not the monitor enters the power standby state when there is no input signal for more than 5 minutes.
n
OTHERS
MULTIMEDIA AUTOPLAY
Sets the media used for auto play. (See page 22.)
SOFTWARE VERSION
Shows the software version, etc.
SOFTWARE UPDATE
You can update the software.
SETTING RESET
Resets the settings to the factory default settings.
* Photo les copied to INTERNAL MEMORY with MULTIMEDIA will not be erased.