Sharp PN-H701 Car Video System User Manual


  Open as PDF
of 60
 
29
E
Menu Items
Character input
For items that require entry of text, press
ENTER
to display the
software keyboard.
Select a character with
, and press
ENTER
to
enter.
• Tochangethecharactersentered,selectCHAR.SETor
press
DISPLAY
(F1).
• Toswitchbetweenuppercaseandlowercase,select
CAPSandpress
ENTER
.
• Todeletecharacters,selectCLEARorDELETEandpress
ENTER
.YoucanalsoperformDELETEbypressing
MODE
(F2).
• Whenyouaredoneenteringcharacters,selectDONEand
press
ENTER
.
Youcanalsonishbypressing
SIZE
(F3).
Tocancelcharacterentry,selectCANCELandpress
ENTER
.
Adjustments for PC screen display
n
Automatic adjustment
WhenyouusethePCD-subtodisplayaPCscreen,orwhen
youchangethesettingofthePC,usetheautomaticscreen
adjustment.
1. Switch the input to D-SUB and display the adjustment
pattern. (See the description below.)
2.
Press
MENU
and select AUTO SYNC. of SCREEN POSITION
of INPUT SELECT in the SETUP menu. (See page 27.)
3. Press
ENTER
and select YES.
4. Press
ENTER
.
 Waituntilautomaticadjustmentnishes.
5. Press
MENU
to close the menu screen.
TIPS
• Ifthescreencannotbeadjustedproperlywithone
automatic adjustment, repeat the automatic adjustment two
orthreetimes.Trymanualadjustmentifnecessary.
• Whentheinputsignalis1024x768or1366x768,the
input resolution must be set manually. Select the resolution
withINPUTSIGNALinSCREENPOSITIONofINPUT
SELECTintheSETUPmenu.(Seepage27.)
n
Screen display for adjustment
BeforemakingadjustmentsintheSCREENPOSITIONmenu
orPICTUREmenu,displayanimagetobrightentheentire
screen.IfyouareusingaWindowsPC,usetheadjustment
patternonthesuppliedCD-ROM.
Opening the adjustment pattern
ThefollowingexampleisperformedinWindows7.
1. Load the supplied CD-ROM into the computer’s CD-
ROM drive.
2. Open [CD Drive] in [Computer].
3. Double-click [Adj_uty.exe].
 Theadjustmentpatternwillappear.
 Adjustthescreenautomaticallyormanually.
4.Whenadjustmentisnished,pressthe[Esc]onthe
computer’s keyboard to quit the adjustment program.
5. Eject the CD-ROM from the CD-ROM drive.
TIPS
• Ifthedisplaymodeonthecomputeryouareusingis
65,000colors,thecolorlevelsinthecolorpatternmay
appeardifferentlyorgrayscalemayappeartobecolored.
(Thisisduetothespecicationsoftheinputsignalandis
not a malfunction.)
 previous next