Filter
Top Products
[ Installation ]
19
Refer to Figure 6 and attach the vent mount to a heating/air conditioning vent in
your vehicle. Position the two tension springs A against a vent louver B. Then push
the vent mount into the vent, far enough so that the hooks C drop down and hook
the rear of the vent louver (see Figure 7). Once the hooks have grasped a vent
louver, the tension springs A will keep the vent mount hooked to the louver.
3.
FM OUT
ANT
C
B
A
D
PUSH
FM OUT
ANT
HOOKED
Figure 6
Figure 7