Filter
Top Products
17
SONAMP
®
875D SE 8-CHANNEL AMPLIFIER
Specifications
Number of Channels: 8 (four stereo pairs)
Output Power (Stereo): 75 watts RMS per channel (X8), 0.25% THD, 20Hz – 20kHz, @ 8 ohms;
140 Watts per channel (X8), 0.1% THD, 1kHz, @ 4 ohms
Output Power (Bridged): 300 Watts per channel (X4) @ 8 ohms
Frequency Response: 20Hz – 20kHz, ±1dB
Total Harmonic Distortion: 0.05% (1kHz, 8 ohms); 0.10% (1kHz, 4 ohms)
Signal to Noise Ratio: -96dB (w/22kHz filter)
Input Sensitivity: 1.5V for 75W RMS Output
1.3V w/BBE ON (+6dB)
1.0V w/BBE ON (+9dB)
Input Impedance: 10k ohms
Maximum Source Input Voltage: 4.0 VAC RMS
3.0V AC RMS w/BBE ON
Loop Output Impedance (Buffered): 100 ohms
Serial Protocol (RS-232 Connection): 9600, N, 8, 1, single CR
Power Consumption: 1,200 Watts
BTU/HR: 850
AC Fuse: 10A (T10AL ~ 250V)
Dimensions (WxHxD): 16½” x 3
7
/
8
” x 17¼” (419mm x 98mm x 438mm)
Dimensions (w/Rack Ears, WxHxD): 19” x 2½” x 17¼” (483mm x 64mm x 438mm)
Shipping Weight: 47 lbs (21.4kg)
Installation Examples
The illustrations on the following pages show the wide variety of audio and audio/video systems that can be assembled
using one or more Sonamp 875D SE amplifiers. Your local authorized Sonance dealer is an expert in audio/video system
planning and installation. Sonance strongly recommends that you work with your dealer to ensure that your system is
properly planned, assembled and installed.