Filter
Top Products
6
SONAMP
®
875D SE 8-CHANNEL AMPLIFIER
Box Contents
Your Sonamp 875D SE box should contain the following items:
(1) Sonamp 875D SE amplifier
(2) Rack ears
(6) Removable control connectors — connected to the amplifier’s rear panel
(4) Removable speaker connectors — connected to the amplifier’s rear panel
(1) IEC Power cable
Unpacking
Save the shipping carton and polystyrene inserts so you can safely transport your amplifier in the future. Before you install
the amplifier, locate the serial number on the rear panel and note it here for future reference:
S/N: __________________
Placement
IIMMPPOORRTTAANNTT::
TToo
aavvooiidd
ddaammaaggee,,
tthhee
aammpplliiffiieerr
mmuusstt
aallwwaayyss
rreesstt
oonn
iittss
ffoouurr
ffeeeett
ttoo
aallllooww
ssuuffffiicciieenntt
cclleeaarraannccee
ffoorr
pprrooppeerr
vveennttiillaattiioonn..
Place the Sonamp 875D SE on a level surface, in an upright position, out of direct sunlight and away from windows
through which rain may enter.
Situate the amplifier away from heat sources such as hot air ducts or radiators. Be sure that the amplifier is adequately
ventilated by convection cooling or suitable cabinet fans.
IIMMPPOORRTTAANNTT::
TThhee
887755DD
SSEE
rreeqquuiirreess
ffoouurr
iinncchheess
ooff
cclleeaarraannccee
oonn
tthhee
ttoopp
aanndd
aal
lll
ssiiddeess..
• Never place any object on or against the amplifier.
• Never operate the amplifier on a carpeted surface as this will compromise ventilation.
• When the amplifier is installed in any cabinet, the front or back must be open during operation. Alternately, install fans
in the cabinet to assure continuous ventilation.
• When rack-mounting, use nylon washers on both sides of the ears to isolate the amplifier from the rack and prevent
ground loops and hum problems.
• Very sensitive low-level sources might pick up some hum radiated from the 875D SE’s power supply. If this occurs, move the unit
away from the other components.